Our Work
Real jobs, photographed on site. Tear-offs, torch-down and cold-ply installations, skylight curbs, parapet rebuilds and attic work, sorted by the kind of job rather than by the address.
A cold-ply flat roof system being installed over an existing low-slope deck. Adhesive is applied by roller and squeegee rather than by torch.
A cold-applied two-ply membrane finished with ceramic granules. The system is adhered without open flame, which suits decks where torching is not practical.
A completed modified bitumen torch-down flat roof. The photographs show the finished field, laps and perimeter as the crew left the deck.
The field membrane of a two-ply torch-down flat roof after the cap sheet has been run. The granulated surface is the finished wearing layer.
Flashing and detail work on a modified bitumen flat roof. Upstands, corners and penetrations are membrane-wrapped before the field sheet is finished.
Torch-down membrane being rolled out across a stripped and prepared flat roof deck. Laps are kept consistent so the seams stay watertight.
Base sheet and cap sheet application on a modified bitumen flat roof. Each ply is heat-welded to the layer beneath it to form a continuous membrane.
A two-ply modified bitumen torch-down system going down over a prepared flat roof deck. The base sheet is laid first, then the cap sheet is torch-applied over it.
Free, No Obligation
Free, no-obligation quote across Toronto and the GTA, with the photographs and the reasoning to back it up.
